CLEAN BOOST – EXITER

  • Marcus Miller optimized
  • The M2 BOOST Marcus Miller delivers a clear, highly articulate bass overdrive with fast response and wide dynamic range.
  • The core tone remains fully intact, while the low end becomes tighter, more focused, and more controlled. Designed to enhance groove, articulation, and expression without coloring or overpowering the original sound.
  • M2 BOOST 
    The M2 BOOST combines a powerful +20 dB clean boost with an exciter style sound in a single pedal. It delivers uncompromising audio quality, stage proven performance, and a signature tone. Developed in direct collaboration with Marcus Miller for musicians who demand maximum control, tone, and flexibility at the highest level.

FEATURES

  • The M2 BOOST combines a +20 dB boost with exciter sound in one enclosure.
  • The pedal delivers a distinctive tonal character, switchable presets, and precise control over Level and Tone.
  • The DEEP BOOST enhances low frequencies in a controlled way, adding more foundation and punch without making the sound muddy.
  • The pedal features a specially designed mechanical True Bypass circuit combined with optimized noise suppression, resulting in near silent switching, ideal for professional stage use.
  • Handcrafted in Germany, the M2 BOOST delivers maximum dynamics, tonal accuracy, and flexibility for musicians who demand uncompromising performance.

SOUNDS

 

  • Boost with character
    The CLEAN BOOST delivers up to +20 dB of output level and is far more than a simple volume boost. It can be used as a transparent level boost, an active tone shaper, or an additional push into the amp’s input stage. The active tone control ranges from neutral to sweet and funky, making it ideal for modern bass sounds with presence, punch, and clarity.
  • 18V supply voltage
    Active basses often deliver a very high output level. In these cases, the M2 BOOST Marcus Miller can be operated safely at 18V. The increased operating voltage provides additional headroom and prevents unwanted distortion, even with hot pickups and highly dynamic playing.
 
SPECS
CLEAN BOOST - Exiter Sound
  • Jewel LED Green
  •  DEEP BOOST (Preset toggle switch)
  • + 20dB Output - Level BOOST (Preset Toggle switch)
  • Controls: Level, Tone
Power Supply
  • 9-18V DC, 50mA
  • Standard operating voltage: 9 V DC
  • Maximum operating voltage: 18 V DC
  • No battery operation
Dimensions
  • Black powder-coated aluminum enclosure
  • Dimensions: 2.4 x 4.4 x 1.2 (W × D × H)
  • Weight: 0.55 lbs
Made in Germany
  • 3-year warranty
  • Handcrafted in small production runs

FAQ

18V supply voltage
Active basses often deliver a very high output level. In these cases, the M2-OD Marcus Miller can be operated safely at 18V. The increased operating voltage provides additional headroom and prevents unwanted distortion, even with hot pickups and highly dynamic playing.

Power Supply Notice:
For noise-free operation, we recommend using a stabilized, well-shielded power supply. Some digital power supplies, especially those with insufficient shielding, may cause hum or high-pitched noise.

When using a multi-output power supply, the outputs should be galvanically isolated from each other.

Any noise issues do not originate from the pedal itself, but are usually caused by an unsuitable power supply or an unfavorable device combination. It is possible that a power supply works perfectly with one pedal but produces noise with another.

If noise occurs, we recommend the following test:
Connect the pedal directly to the amplifier, do not connect a guitar, and power the pedal using a separate power supply. When switching the pedal on, only operation or gain-related switching and control noises should be audible, no hum and no high-pitched noise. This test is an effective way to check the pedal independently of the rest of the signal chain.